Tensor Global Tensorgrip® P307-22 Low VOC Contact Adhesive Cylinder, 5.81 gal

Tensorgrip® P307 is a multi-purpose contact adhesive that effectively bonds a vast range of substrates while maintaining compliance with stringent California VOC requirements (SCAQMD Rule 1168). Tensorgrip® P307 is aggressive and versatile, lending itself to bonding flexible and porous materials with ease. TENSORGRIP® P307 is designed as a portable, self-contained spray system for field or shop applications. Adhesive should be applied to both surfaces to be bonded, allowed to dry (5-10 minutes or until dry to touch) then parts mated under pressure. Bonds should be made as soon as practical. If adhesive is left to dry for over 2 hours, parts should be recoated. Normal coverage required with lacing spray pattern is approximately 80%; however porous surfaces may need a second coat. Initial bond is strong enough to allow cutting or trimming immediately although ultimate strength is achieved in 1-3 days. Canister system will spray adequately above 60 Degree F. Canister system should be kept in warm area. In the event that the canister gets abnormally chilled, freezes or gives poor or sputtering spray, it should be warmed up before continued usage. Warming canister by immersion in warm water is recommended. Notice!!! Avoid direct flame or exposure to excessive heat. Do not store at temperatures over 120 Degree F. Not for use on flexible vinyl or polystyrene foam. Canister System Usage: When hose is connected, keep canister valve open and hose pressurized at all times. Do not disconnect the hose until ready to connect to new canister. Release pressure in hose before disconnecting from canister. If gun and hose must be stored unattached to pressurized canister, they may be cleaned for future use by attaching to canister of 609 Citrus cleaner and flushing until clear.

FEATURES

• • Excellent bonding to porous substrates
  • Aggressive adheres to nearly any surface
  • High-strength, long-term bond
  • Strong initial bond
  • Low VOC California Compliant (SCAQMD Rule 1168)
  • CO-REZ Technology
  • Heat resistance up to 200 Degree F/94 Degree C
  • Substrates - Foam, insulation, standard laminate